Tooling Supplies

Plate Puller for 3 Plate Moulds

Plate Puller

DME offers quality Plate Pullers for 3 Plate Moulds.

Specifications

Metal Markers

Metal Markers

The Nissen metal marker utilizes a specially formulated polyurethane paint to provide permanent marking under almost any conditions. The marks will remain bright, clear and legible even on material that will be stored outside for long periods of time or material that will receive heavy abuse.

 

The Nissen Ball Point Metal marker is available in an unbreakable plastic bottle for marking with paint on metal, wood, plastic, glass, etc. The tough metal tip has a 1/8″ precision stainless steel ball and comes with a plastic cap to keep the tip clean and to allow the marker to be carried in your pocket.

Specifications

Latch System for Mould Handling

Latch System

The T.O.I (Tool Opening Interrupter) holds the mould closed for transporting, setup, teardown, storage. The T.O.I is two pieces; a fixed piece that bolts to the stationary mould half, and a slide that moves within a track on the fixed piece. The slide bolts to the movable mould half. As the mould is lifted, the slide wedges tightly to the fixed piece, preventing the mould from opening.

Specifications

Forged Eye Bolts

Forged Eye Bolts

DME offers high quality Forged Eye Bolts. They show full engagement with a shoulder design and create huge savings. They are steel forged heat treated quenched and drawn. They have a tensile strength of 65000 PSI minimum, a yield strength of 50000 PSI minimum, a Elongation of 30% minimum and a Reduction of Area at 60% minimum.

Specifications

Hoist Rings

Hoist Rings

Whether you are lifting a 400kg Mould or a 22,00kg piece of machinery, DME Hoist Rings offer a safer alternative than conventional eyebolts as they are capable of pivoting 180º and swivelling 360º to compensate for pitch, roll and sway when lifting heavy unbalanced loads. They will not yield to heavy side loads and 11 thread sizes are available from M8 to M64.

Specifications

Pneumatic Mini Die Grinders

Pneumatic Mini Die Grinders

DME offers a range of Die Grinders including: Pneumatic Mini Grinders, High Speed Die Grinders & Pneumatic 1/4″ Angle Die Grinders.

Specifications

Solid Carbide Burrs

Solid Carbide Burrs

DME has a complete range of Tungsten Carbide Burrs available from stock. Plain Cut and Double Cut flute cutting diameters range from 1/16″, 3/32″, 1/8″, 1/4″ and 3/8″ with 1/8″ and 1/4″ Shanks. Burrs also available in a 10 piece set.

Specifications

Needle Files

Needle Files

DME Needle Files include Mascot Needle Files, Tell Needle Files and Diamond Needle Files. The Tell Needle Files come in sets of 12 or 6. The Diamond Needle Files are excellent quality, economically priced files; available in the five most popular shapes. Deliver excellent performance deburring smoothing and finishing ultra hard materials, such as hardened steel, carbide, ceramics, glass.

Specifications