Gate Mate Nozzles

Mini Gate Mate Lite

Mini Gate Mate Light

The Mini Gate Mate Lite enables mould designers and mould makers the flexibility of using this hot sprue bush in many moulding applications. The full length beryllium copper tip ensures correct gate control and minimal vestige, using our Euro made heater with an in-built thermocouple.

 

The gate seal off diameter is only 12mm and our hot sprue bushes are available in nozzle “A” lengths of 35mm and 65mm, making them extremely designer friendly and versatile for plastic injection moulds, and plastic injection moulding.

 

A perfect solution for multi-cavity manifolds and small single cavity moulds.

 

Suitable for a wide range of materials such as: PP, PE, PS, SAN, ABS, PC, POM, TPE, TPO, PA and PPO.

 

Available from stock and all spares are kept on hand.

Specifications

Gate Mate Lite

Gate Mate Lite

Gate Mate Lite is the perfect solution for single and multi cavity moulds. The full length beryllium copper tip ensures correct gate control and minimal vestige, using our Euro made heater with an in-built thermocouple.

 

The gate seal off diameter is only 18.5mm and our hot sprue bushes are available in 10 different nozzle lengths, from 42mm to 130mm, making them extremely designer friendly and versatile for plastic injection moulds, and plastic injection moulding.

 

A perfect solution for multi-cavity manifolds and small single cavity moulds.

 

Suitable for a wide range of materials such as: PP, PE, PS, SAN, ABS, PC, POM, TPE, TPO, PA and PPO.

 

Available from stock and all spares are kept on hand.

Specifications

Gate Mate 4 Nozzles

Gate Mate 4 Nozzles

DME Gate Mate 4 Nozzles are ideal for fast cycling multi cavity moulds and thin walled parts. Their compact design permits closer centreline distances for use in small moulds or increased cavities in larger moulds. The thermocouple placement gives perfect heater control and the overall nozzle design gives great thermal insulation. The heater thermocouple and tips are all replaceable.

 

The nozzles are available in 3 versions: a complete assembly with a standard tip, a sub assembly with a range of 3 different tips that can be ordered separately and a sub assembly with a front load heater (with an inbuilt thermocouple) which allows the moulder to replace the heater without removing the mould from the machine.

Specifications

Mini Gate Mate Nozzles

Mini Gate Mate

The Mini Gate Mate Nozzles are ideal for fast cycling mulit-cavity moulds. The compact design permits shorter overall stack up of the “A” side mould plates. The Mini Gate Mate Nozzles are provided with either a square coil heater or a cast in heater. Thermocouple placement provided better heater control and the overall body design improves thermal insulation. Square coil heater, thermocouple  and tip are all replaceable.

Specifications

Jumbo Gate Mate

Jumbo Gate Mate

The Jumbo Gate Mate Hot Sprue Bushing is designed for direct part gating in single cavity moulds which eliminates a cold sprue. The flow through channel through the body is 12.7mm (.500″) and the bushing is available in 2 different lengths. The unique design of the bushing provides minimal gate vestige without showing witness lines.

Specifications

Gate Shell Insulators

Gate Shell Insulators

Gate Shell Insulators are great and can be used with the above Gate Mate 4 Nozzles and the DME Medium and Jumbo Gate Mate Nozzles. The advantages of using Gate Shell Insulators are: Faster colour changes, Eliminate material breakdown/burning and Improves heat insulation around the gate area of the mould.

Specifications