Straight Shot Hot Sprue Bushings

S Series Straight Shot

S Series Straight Shot

The Standard S-Series Straight-Shot is designed for direct part gating or for feeding half-round or trapezoidal runners. It is supplied with a .16 diameter gate and no gate land. Available in seven standard shoulder lengths with either a 1⁄2″ or 3⁄4″ spherical radius and 120 or 240 volt heater. The S-Series Straight-Shot can be retrofitted to almost any mould that uses a conventional sprue bushing.

Specifications

E Series Straight Shot

E Series Straight Shot

DME Standard E-Series Straight-Shot Hot Sprue Bushings (Long and Short Styles) provide a .25 inch extra stock allowance on the front face to permit machining of runner profiles or part contours into that face. They are supplied with a .06 diameter gate and a .25 inch gate land. The gate diameter can be enlarged to suit the particular moulding application.

Specifications

ER Series Straight Shot

ER Series Straight Shot

The DME standard ER-Series Straight-Shot Hot Sprue Bushings (Long and Short Styles), like the standard E-Series, are supplied with a .25 inch extra stock allowance on the front face to permit machining of runner profiles or part contours into that face. These bushings feature a “reverse taper” design that originates from under the heat source, providing easier start-ups.

Specifications

T Series Straight Shot

T Series

The DME Standard “T” Series Straight-Shot improves the performance of three-plate moulds by virtually eliminating the sprue from the runner system. It is available with either 1/2″ or 3/4″ spherical radius, 120 or 240 volt heater and a 7/8″ or 13/8″ long stripper plate bushing to suit the application.

Specifications

TR Series Straight Shot

T Series

The DME standard TR-Series Straight-Shot Hot Sprue Bushing, like the standard T-Series, improves the performance of three-plate runner moulds by minimizing the length of protrusion on the runner system. This bushing features a “reverse taper” design that originates from under the heat source, providing easier start-ups.

Specifications

High Performance Series Straight Shot

High Performance Series

DME offers High Performance Series Straight Shot Hot Spue Bushings. These can either be in “S”(Standard Tip) or “E”(Extended Tip) type configuration.

Specifications

Straight Shot Bushings Replacement Parts

Straight Shot Bushings Replacement Parts

DME offers a range of quality Straight Shot Bushings Replacement Parts.

Specifications

Integrally Heated Sprue Bushings

Integrally Heated Sprue Bushings

The Integrally Heated Sprue Bushing is uniquely designed for high performance and reliability for direct gating applications, even with the most demanding moulding cycles and plastic resins. The product’s advanced heat transfer capability is attributed to its integrally heated design, resulting in a more uniform heat profile. A replaceable thermocouple is strategically located near the melt flow channel to optimize processing conditions with all thermoplastics.

Specifications